menù secondario

Jiangsu Liside Chemical plant Co.,Ltd

vinyl ether

VC-copolymer MP Resin for Industrial Coatings

REACH COMPLIED

VINYL ETHER - VC COPOLYMER

REACH REGISTRATION: N°.   01-2119458772-30 Monomer vinyl Cloride - MP resins are copolymers. These have not to be registered under REACH.

MP15,MP25,MP35,MP45,MP60

REACH Registration

Monomers of MP resins :

Vinyl chloride MONOMER  REACH NO.   01-2119458772-30-0031

Isobutyl vinyl ether Pre- Registration 05-2114304400-72-0000, 100 to 1000 Tonnes, deadline 31/05/2013

General

Nature copolymers based on vinyl chloride and vinyl isobutyl ether.

Product Specification

 

MP15

MP25

MP35

MP45

MP60

Viscosity mpa.s

15±5

25±5

35±5

45±5

60±5

Chlorine mass fraction %

44±1

44±1

44±1

44±1

44±1

Volatile ≤ %

1

1

1

1

1

Viscosity 20 % toluene solution at 23 °C ( 73 °F )(ISO 3219, DIN 53019/53214,shear rate=500s-1)

phisical Characteristics

 

MP 15

MP 25

MP 35

MP 45

MP 60

Phisical form

White Powder

PWhite Powder

White Powder

White Powder

White Powder

K Value

35

35

35

35

35

Volatile

≤ 0,5%

≤ 0,5%

≤ 0,5%

≤ 0,5%

≤ 0,5%

Bulk Density

0.37±0.02 g/ml

0.37±0.02 g/ml

0.37±0.02 g/ml

0.37±0.02 g/ml

0.37±0.02 g/ml

Viscosity

12-19 mpa.s

22-28 mpa.s

30-40 mpa.s

45-50 mpa.s

60-65 mpa.s

Application

MP resins are binders resistant to hydrolysis. They can be used for anti-corrosion coatings, for coatings on galvanized steel, other non-ferrous metals, concrete, fiber cement, for road marking paints, flame-retardant coatings on non-flammable building materials, printing inks, marine and container paints. They are compatible with most alkyd resins, dry oils, polyacrylic resins, liquid epoxy resins, tars and bitumens. MP resins offer advantages to both manufacturers and users of coatings:

broad choice of solvents, particularly budget-priced blends of aromatic and aliphatic hydrocarbons
 good compatibility with other coatings raw materials
 good pigment binding capacity even at high solids
 unrestricted choice of pigments and extenders
 easy application by all common techniques, no cob-webbing even at high solids
 thermal stability allows force drying
 good adhesion on iron, steel and many unrelated coatings systems, good intercoat adhesion
 good resistance of properly formulated coatings to aqueous alkalis and acids, salt solutions, to stress from water, humidity changes, low and cyclic temperatures as well as to chalking and yellowing
 long lasting corrosion protection even under extreme outdoor conditions

packaging

Packaging and Storage25kgs woven bag with PE liner.MP resins can be stored for 2 years if kept away from heat and moisture